Crown Polymers
Crown Polymers 320 Kit
Multi component Crown Polymers floor package supplied as 3 gallon, 15 gallon and 1.5 gallon units for a complete system.
Specifications
- Brand
- Crown Polymers
- Type
- Multi component floor system package
- Sold as
- 3 gallon plus 15 gallon plus 1.5 gallon units
- SKU
- 1582
Good to know
- This is a system package, not a single product. Call 817-676-6793 before ordering so we can confirm the component breakdown against your square footage and slab condition.
- Keep Crown Polymers components together through the build. Mixing brands between primer, base coat and topcoat is where intercoat adhesion problems come from.
- Mix ratios and full application detail for each component are on the technical data sheets, available on request.
- Ships as regulated liquids under ground shipping rules, and at nearly 20 gallons a kit this usually moves by freight. Call 817-676-6793 for a freight quote.
About the Crown Polymers 320 Kit
The Crown Polymers 320 Kit is a multi component floor package rather than a single pail of coating. It ships as a 3 gallon unit, a 15 gallon unit and a 1.5 gallon unit, which is the shape of a complete system buy rather than a single product buy: material for the coats plus the supporting components in matched quantities.
Crown Polymers builds resinous flooring systems for commercial, industrial and institutional work, and their kits are assembled so the parts are compatible with each other by design. That is the reason to buy a package instead of assembling one from three brands. Intercoat adhesion, recoat windows and cure chemistry are the places where mixed brand systems fail, and they fail after the floor is in service rather than during the install.
Because this is a packaged system, the right way to buy it is with a phone call. Tell us the square footage, the condition of the slab, whether it is going to see forklift traffic, chemical exposure or wash down, and what finish you are selling, and we will confirm the exact component breakdown of this kit, the coverage each component gives at the specified build, and whether you need a separate primer or moisture vapor barrier underneath. Call 817-676-6793.
We will not publish invented coverage numbers or mix ratios on a packaged system. The mix ratios and full application detail for every component are on the technical data sheets, which we will send on request before you order.
What it is used for
- Complete commercial floor system buys
- Industrial and institutional resinous flooring
- Warehouse and back of house floors
- Projects specified around the Crown Polymers system
Before you order
Work out how much you need
The most common ordering mistake in this category is buying by the gallon instead of by the floor. Coverage changes with porosity, profile and whether the coat is a base, a broadcast or a topcoat. Put the slab dimensions in and get a range rather than a single number.
How much material do I need?
Enter the slab. We will give you a range, because porosity and surface profile change real coverage.
- Floor area
- 400 sq ft
- Base coat
- 3.1 to 3.4 gal
- Topcoat (1 pass)
- 3.1 to 3.4 gal
- Flake
- about 8 x 25 lb boxes
Base coat, flake broadcast to rejection, then a clear topcoat. Order roughly 10% over on a first job.
Questions about this product
What comes in the Crown Polymers 320 Kit?
The Crown Polymers 320 Kit ships as a multi component package made up of a 3 gallon unit, a 15 gallon unit and a 1.5 gallon unit. Because the breakdown depends on the configuration, call 817-676-6793 and we will confirm exactly which components you are receiving before the order goes out.
How much floor does the Crown Polymers 320 Kit cover?
Coverage for the Crown Polymers 320 Kit depends on which component you are applying, the film build the system calls for, and how porous the prepared slab is. We publish the technical data sheet rates rather than a single number. Call 817-676-6793 with your square footage and we will size the order.
Can I mix Crown Polymers components with another brand?
We do not recommend it. The Crown Polymers 320 Kit is assembled so the components are chemically compatible and share matched recoat windows, and substituting another brand into the middle of the build is where intercoat adhesion failures start. Keep the system together from primer through topcoat.
Do I need a separate primer or moisture barrier with this kit?
It depends on the slab. The Crown Polymers 320 Kit is a system package, but a slab with high moisture vapor emission still needs a dedicated moisture vapor barrier underneath. Test the slab first, then call 817-676-6793 and we will tell you what has to go down before the kit does.
How does the Crown Polymers 320 Kit ship?
The Crown Polymers 320 Kit ships as regulated liquids under ground shipping rules, and at roughly 19.5 gallons across the three units it normally moves as freight rather than parcel. Call 817-676-6793 for a freight quote and delivery timing to your job site or shop.
Goes well with
Crown Polymers Epoxy 8320 Kit
100 percent solids hybrid epoxy that serves as primer, body coat or topcoat, sold in 3 gallon kits for commercial work.
$240.00
SKU 1389
Crown Polymers Epoxy Primer 8355 Kit
Self priming, moisture tolerant high build epoxy binder made to receive 1/8 and 1/4 inch vinyl flake, in 2 gallon kits.
$130.00
SKU 1436
Crown Polymers 8340 Kit
Clear polyaspartic supplied in 3 gallon kits, used in Crown Polymers flake and resinous floor systems.
$313.50
SKU 1580