Dripless Dispensing Solutions Fine Nozzles
Ten fine dispensing nozzles for placing crack filler and sealant into tight joints with control.
Specifications
- Sold as
- 10 pack
- Type
- Fine dispensing nozzles
- Brand
- Dripless Dispensing Solutions
- SKU
- 1494
- Ships in
- 2 to 3 business days
Good to know
- Cut the tip to the width of the crack, not wider. An oversized opening dumps material on the surface where it gets ground off, leaving the crack hollow underneath.
- A partially used cartridge sets up in the nozzle. Plan on a fresh tip per cartridge restart, which is why these ship ten to a pack.
About the Dripless Dispensing Solutions Fine Nozzles
These Dripless Dispensing Solutions fine nozzles come ten to a pack and fit standard cartridge guns. The fine tip is the point: it puts filler down into a narrow crack or a tight control joint instead of piling it on top, which is what a wide factory nozzle does.
On crack repair that difference shows up later. Material that sits on the surface rather than filling the void gets ground off during prep, the crack is still hollow underneath, and the repair telegraphs through the finished floor. A fine nozzle lets you get down into the crack, work the material in, and tool it flush with far less waste and far less cleanup.
Nozzles are consumables. Any cartridge you do not finish sets up in the tip, so a ten pack is roughly what a crew burns through on a repair-heavy job. Order them with the filler, not after.
What it is used for
- Placing crack filler down into narrow cracks
- Filling tight control joints and saw cuts
- Detail sealant work at edges and penetrations
- Keeping spare tips on hand for partially used cartridges
Questions about this product
What are fine dispensing nozzles used for?
Dripless fine dispensing nozzles fit a standard cartridge gun and place crack filler or sealant down into narrow cracks and tight control joints. The narrow tip puts material into the void rather than piling it on the surface, where it would just be ground off during prep.
How many nozzles come in a pack?
These Dripless Dispensing Solutions fine nozzles are sold ten to a pack. Nozzles are consumables because filler cures inside any tip left on a partially used cartridge, so a ten pack is roughly what a crew uses on a repair-heavy job.
How far should I cut a dispensing nozzle tip?
Cut the nozzle to match the width of the crack you are filling and no wider. An oversized opening delivers more material than the void will take, which leaves filler on the surface, wastes product and makes tooling the repair flush much harder.
Goes well with
Bondo All-Purpose Putty
Two-part polyester filler in a 1.9 lb container for fast concrete patch and crack repair ahead of a coating.
$36.95
SKU 1498
Hyde Wire Brush
Hand wire brush for cleaning out cracks, joints and patch areas so repair material bonds to sound concrete.
$17.95
SKU 1378
Bondo Cream Hardener
The cream hardener that catalyzes Bondo polyester filler for concrete patch and crack repair work.
$6.95
SKU 1380