Polycoat Products Poly-I-Gard 295 Kit
Polycoat Products Poly-I-Gard 295 coating supplied in Dolphin Grey as a 4.5 gallon kit for specified system builds.
Specifications
- Brand
- Polycoat Products
- Color
- Dolphin Grey
- Sold as
- 4.5 gallon kit
- SKU
- 1574
Good to know
- Confirm the complete system before ordering. Traffic coatings are layered builds and a single component out of context will not perform on its own.
- Get a physical color chip if you are matching an existing Dolphin Grey deck. Grey shifts noticeably between sodium, LED and daylight.
- Mix ratio, coverage rate, pot life and recoat windows are on the technical data sheet, available on request at 817-676-6793.
- Ships as a regulated liquid under ground shipping rules. Call 817-676-6793 for freight on multiple kits or pallet quantities.
About the Polycoat Products Poly-I-Gard 295 Kit
Polycoat Products Poly-I-Gard 295 is supplied in Dolphin Grey as a 4.5 gallon kit. Poly-I-Gard is Polycoat's line for protective and traffic bearing coating work, and material in this family is bought against a specification rather than off the shelf, so the layers that go under and over it are part of the order.
Dolphin Grey is the classic traffic coating color. It is dark enough to hide the dirt that a parking deck, a walkway or a service area accumulates, and light enough that the space does not go gloomy under artificial light. If you are matching an existing deck, get a color chip in hand before ordering, because grey reads differently under sodium, LED and daylight.
System position depends on the build you are working to. On a traffic coating job there is usually a primer, a base or membrane layer, and a wear or top layer, and each has a recoat window that has to be respected. Ordering one component without confirming the rest of the stack is where jobs get delayed on site.
We publish what the manufacturer states for this SKU: Dolphin Grey, 4.5 gallons per kit. Mix ratio, coverage, pot life, recoat window, cure schedule and substrate limits are on the Polycoat Products technical data sheet, available on request. Call 817-676-6793 with your project details, the square footage and the substrate, and we will send the data sheet, confirm the rest of the system and quote freight.
What it is used for
- Traffic bearing deck and walkway coatings
- Parking structure and ramp surfaces
- Protective coatings over concrete in service areas
- Specified Polycoat Products system builds
Before you order
Work out how much you need
The most common ordering mistake in this category is buying by the gallon instead of by the floor. Coverage changes with porosity, profile and whether the coat is a base, a broadcast or a topcoat. Put the slab dimensions in and get a range rather than a single number.
How much material do I need?
Enter the slab. We will give you a range, because porosity and surface profile change real coverage.
- Floor area
- 400 sq ft
- Base coat
- 3.1 to 3.4 gal
- Topcoat (1 pass)
- 3.1 to 3.4 gal
- Flake
- about 8 x 25 lb boxes
Base coat, flake broadcast to rejection, then a clear topcoat. Order roughly 10% over on a first job.
Questions about this product
What is Polycoat Poly-I-Gard 295?
Polycoat Products Poly-I-Gard 295 is a coating from the Polycoat Poly-I-Gard protective and traffic bearing line, supplied in Dolphin Grey as a 4.5 gallon kit. It is bought as part of a specified system build, so confirm the primer and wear coat that pair with it before ordering.
What color is Poly-I-Gard 295 available in here?
The Polycoat Products Poly-I-Gard 295 kit we stock is supplied in Dolphin Grey, the standard mid tone traffic coating color. It hides deck dirt and tire marks better than a light grey while keeping a parking structure or walkway from reading dark under artificial lighting.
How much area does a 4.5 gallon Poly-I-Gard 295 kit cover?
Coverage for Polycoat Products Poly-I-Gard 295 depends on the specified film build for the layer it is serving, plus substrate porosity and texture, so a single figure would be misleading. The technical data sheet carries the rate. Call 817-676-6793 with square footage and we will size it.
What is the mix ratio for Poly-I-Gard 295?
Mix ratio and full application detail for Polycoat Products Poly-I-Gard 295 are on the manufacturer technical data sheet, available on request. Two component coatings mixed off ratio cure soft or brittle, so we send the sheet rather than quote a figure. Call 817-676-6793 and we will email it.
Can Poly-I-Gard 295 be used on a parking deck?
Polycoat Products Poly-I-Gard 295 comes from Polycoat's protective and traffic bearing coating line and is supplied in the Dolphin Grey typical of deck work. Whether it suits your specific deck depends on the full system spec and substrate, so call 817-676-6793 and we will check it against the project.
Goes well with
Polycoat Products Polyprime U Kit
Two component Polycoat Products primer supplied as a 5 gallon plus 2 gallon kit for deck and coating system builds.
$249.00
SKU 1627
Polycoat Products PC-IM 129 Kit
Two part Polycoat Products coating supplied in black as a 5 gallon plus 1 gallon kit for concrete and deck systems.
$275.00
SKU 1576
TCS Crack Filler Kit
Fast cure two component crack filler in a 2 gallon kit for filling cracks and joints ahead of a floor coating.
$150.00
SKU 1391