Dynamic Heavy Duty twist lock extension pole
Heavy duty twist lock extension pole for rollers and squeegees, set to length and locked before the pour.
Specifications
- Type
- Twist lock extension pole, heavy duty
- Use
- Roller frames and squeegee frames on floor coating work
- Ships
- 2 to 3 business days
Good to know
- Set the length and lock it before you mix material. Adjusting a pole with a loaded roller is a mess you do not need.
- Clean the twist lock before resin cures in it. Cured coating in the mechanism is what ends most extension poles.
- Confirm the thread against the roller and squeegee frames you already own.
- Floor work puts side load on a pole that wall painting does not. A light duty pole flexes at the joint under a loaded squeegee.
About the Dynamic Heavy Duty twist lock extension pole
A twist lock extension pole is the everyday pole. You twist to release, slide to the length you want, and twist to lock. There is no button, no spring and no pin hole to line up, which is the reason most crews reach for this style when they are moving fast.
Heavy duty matters on floor work specifically. A pole used for wall painting carries a light roller. A pole used to back-roll a 100% solids epoxy or pull a loaded squeegee is under real side load, and a light pole flexes and collapses at the joint under exactly that kind of pressure. The failure always seems to happen with material on the floor and the clock running.
Set and lock the length before you mix. Adjusting a pole with a loaded roller on the end gets resin on your hands and puts a drip somewhere you did not want one. Wipe the pole down at the end of the pour, because cured coating in a twist lock is what takes these poles out of service rather than wear.
What it is used for
- Back-rolling epoxy and polyaspartic floors
- Running a squeegee frame across open slab
- Applying primers and sealers from a standing position
- General roller work on prep and cleanup
Questions about this product
What is a twist lock extension pole used for on a floor coating job?
A heavy duty twist lock extension pole carries a roller frame or squeegee frame so a coating can be applied and back-rolled from a standing position. You twist to release, slide to length and twist to lock, which is faster than pin or button style poles on a working floor.
Will it fit my roller frame?
This is a threaded extension pole intended for standard threaded roller and squeegee frames. Check the thread on the frames you already run before ordering so the pole and your existing tools pair up directly rather than needing an adapter mid-job.
Why buy a heavy duty pole instead of a painter's pole?
Floor coating puts side load on a pole that wall painting never does. Pulling a loaded squeegee or back-rolling a 100% solids epoxy flexes a light pole and can collapse the joint, and that failure happens with material already on the floor and the open time running out.
How do I keep the lock working?
Wipe the pole down before coating cures on it. Resin that hardens inside a twist lock mechanism is the usual reason these poles get retired, well ahead of any actual wear, so cleaning the pole is part of packing up rather than an optional step.
Goes well with
Midwest Rake® S550 Professional™ EasySqueegee® Frame
Midwest Rake S550 EasySqueegee frame in 18 and 26 inch, matched to the blade width you run.
$49.95
SKU 1430
Wooster Big Ben®
Wooster Big Ben 18 inch roller frame, the wide frame used to back-roll epoxy and polyaspartic floors quickly.
$19.95
SKU 1481
Midwest Rake® Wooster SherLock Pole
Extension pole that locks securely at length, with a hexagonal inner pole that stops the head from twisting under load.
$33.95
SKU 1451
Linzer Pro Edge Mini Roller
Mini roller in 3/8 inch used to cut in coating along walls, curbs and posts ahead of the field coat.
$7.95
SKU 1500