Metabo Angular Grinder

A hand angle grinder is the second machine on every concrete floor job. The walk-behind covers the field and then stops several inches short of every wall, and everything left over, perimeters, corners, closets, stairs, columns, curbs and thresholds, gets done by hand. This Metabo angle grinder is the tool for that work.

What it does depends entirely on what you fit to it. With a diamond cup wheel it grinds concrete and creates profile at the perimeter to match the field. With PCD tooling it strips coatings, mastic and glue in areas a big machine cannot reach. With a diamond blade it cuts. The grinder is the power source, the accessory decides the job.

Run it with dust capture. Hand grinding concrete without a shroud and vacuum puts respirable silica straight into the operator's breathing zone and coats the entire job with fine dust that then has to be cleaned before coating. A 7 inch aluminum dust shroud, a 2 inch hose and a dust extractor turn this from the dirtiest tool on the site into a controlled one. Dust control is a system, and the grinder is only one part of it.

Before ordering accessories, confirm the specifications of the machine against what you intend to mount. Wheel size capacity, guard mounting, spindle thread and the grinder's rated speed all determine what accessories are safe and appropriate, and those are figures to verify against Metabo's documentation for this exact model rather than assume. Call 817-676-6793 and we will confirm which shroud and tooling combination fits the model you are buying.