Oscillating Tool Blades
Oscillating multi-tool blade sets in 5 and 6 piece packs for cut-outs, joint work and undercutting where a grinder will not fit.
Specifications
- Sold as
- 5 piece or 6 piece set
- Type
- Oscillating multi-tool blades
- Job stage
- Prep, cut-out and repair
- Category
- Surface preparation consumable
- SKU
- 1489
- Shipping
- 2 to 3 business days
Good to know
- Blade mounts differ by tool brand and generation. Match the shank to your tool before ordering.
- Blades are consumables. Cured coating and adhesive dull teeth quickly, and a dull blade makes heat rather than a cut.
- Cut out failed areas before grinding, so you are grinding to a defined edge instead of chasing delamination across the floor.
- Choose the 5 or 6 piece count based on how much cut-out work the job involves, not on price per blade.
About the Oscillating Tool Blades
These oscillating tool blades cover the cuts a grinder and a scraper cannot make. On a coatings job that means plunge cuts into failed coating so you can chase a delaminated area back to sound material, cutting out old joint filler and caulk ahead of refilling, undercutting door jambs and casing so the coating can run to a clean line, and trimming transitions at thresholds and drains.
The oscillating tool earns its place during prep and repair, not during placement. It runs before the grinder in most sequences: cut the perimeter of the failure, strip and grind the field, patch, then coat. It is also the tool you reach for when something has to come out cleanly in a tight corner without shaking the whole assembly loose.
Sets are offered in 5 piece and 6 piece packs, so pick the count that matches how much cutting the job actually involves. Blades are consumables. Teeth dull fast in cured coating, adhesive and anything with aggregate in it, and a dull blade builds heat instead of cutting.
Oscillating tools use several different blade mounts depending on brand and age. Check the interface on your tool against the blade shanks before ordering.
What it is used for
- Plunge cutting the perimeter of delaminated or failed coating
- Cutting out old joint filler and caulk before refilling
- Undercutting door jambs and casing so coating runs to a clean edge
- Trimming transitions at thresholds, drains and equipment pads
- Detail cuts in corners where a grinder or scraper will not reach
Questions about this product
What are oscillating tool blades used for on concrete coating jobs?
Oscillating tool blades handle the cuts a grinder cannot make. On coating jobs crews use them to plunge cut around failed or delaminated coating, remove old joint filler and caulk, undercut door jambs, and trim transitions at thresholds and drains. It is a prep and repair tool, used before the floor is coated.
Will these blades fit my oscillating multi-tool?
Check the blade mount on your tool first. Oscillating multi-tools use several different blade interfaces depending on the brand and how old the tool is, and no single blade shank fits every machine. Compare the shank on these blades against the arbor or quick-change head on your tool before ordering.
Should I buy the 5 piece or the 6 piece set?
Pick the oscillating blade set count by how much cut-out work the job involves. A floor with a few delaminated patches and some joint filler to remove burns through blades quickly, so the larger set is usually the safer order. Blades are consumables and running out mid-job stops the prep crew.
Do oscillating blades replace grinding for coating removal?
No. Oscillating tool blades cut and define edges, they do not profile concrete. Use them to cut out failed coating and detail tight areas, then grind the slab to open the surface and create a mechanical profile for the new system. Cut out first, grind second, vacuum, then coat.
Goes well with
QEP Stripper Blades
8 in. replacement stripper blade for floor scrapers, used to cut old coating, adhesive and tile off the slab before grinding.
$7.95
SKU 1483
Replacement Scraper Blades
4 in. replacement blade for hand scrapers, used for drips, cured splatter, residue and detail cleanup around the floor.
$2.00
SKU 1495
Replacement Rubber Blade
16 in. replacement rubber blade in flexible or stiff, the wear part on the squeegee that spreads coating across the floor.
$25.95
SKU 1524