Big Ben REPL Leg
R085 replacement leg for the Big Ben roller frame, so a bent leg does not cost you the whole frame.
Specifications
- Part number
- R085
- Product type
- Replacement leg for the Big Ben roller frame
- Ships
- 2 to 3 business days
Good to know
- A bent leg shows up in the finished floor as uneven roller pressure, not just as a wobbly tool.
- Confirm the part matches the Big Ben frame you own before ordering.
- Keep a spare with your coating tools. Discovering a bent frame after the material is mixed is the wrong time to find out.
About the Big Ben REPL Leg
This is the R085 replacement leg for the Big Ben roller frame. It is the part that gets bent when a loaded 18 inch frame gets dropped, leaned on, or racked in a truck bed with everything else, and it is the single most common reason a frame that is otherwise fine stops running true.
A bent leg is not a cosmetic problem on floor work. The frame stops holding the cover parallel to the slab, so the roller loads unevenly and the back-roll pass leaves pressure marks in the film. On a flake base coat that translates into uneven chip pickup, and on a clear topcoat it shows as gloss variation once the light hits it.
Order one with the frame or keep one in the truck. It is a low cost part that keeps a working frame out of the trash, and the time to discover a bent leg is not the morning you have material mixed and a floor waiting.
What it is used for
- Rebuilding a bent or damaged Big Ben roller frame
- Keeping a spare frame part on the truck for coating jobs
- Restoring even roller pressure on back-roll passes
Questions about this product
What does the R085 leg fit?
The R085 replacement leg is the service part for the Big Ben roller frame. It restores a frame with a bent or damaged leg rather than requiring you to buy a whole new frame, which is worth doing on a tool that otherwise has plenty of service life left in it.
Why does a bent roller leg matter?
A bent leg on a Big Ben frame stops holding the roller cover parallel to the slab, so pressure across the cover goes uneven. On a floor coating that shows as roller marks in the film, uneven chip pickup on a flake base coat, and gloss variation in a clear topcoat.
Should I keep a spare on the truck?
Yes, a replacement leg for the Big Ben roller frame is a low cost part, and frames get bent in transit and storage far more often than they ever wear out from actual use. Having one on hand makes a damaged frame a two minute fix.
How do I know if my roller frame leg is bent?
Lay the Big Ben frame on a flat surface with a cover fitted and look at how the cover contacts it. A bent leg shows as the roller sitting at an angle or touching unevenly along its length, and it will put uneven pressure into the coating film.
Goes well with
Wooster Big Ben®
Wooster Big Ben 18 inch roller frame, the wide frame used to back-roll epoxy and polyaspartic floors quickly.
$19.95
SKU 1481
Midwest Rake® Wooster SherLock Pole
Extension pole that locks securely at length, with a hexagonal inner pole that stops the head from twisting under load.
$33.95
SKU 1451
Linzer Pro Edge Mini Roller
Mini roller in 3/8 inch used to cut in coating along walls, curbs and posts ahead of the field coat.
$7.95
SKU 1500