Vantage HEPA Dust Extractor Vacuum (VFG-Z20)

The Vantage VFG-Z20 is a HEPA dust extractor for concrete work, running on single phase 110V/60Hz at 2.4 kW. Published performance is 224 CFM at a 2 inch air intake and 247 CFM at a 3 inch air intake, with maximum vacuum of 86 inches of water column. Those two intake figures are worth reading carefully, because they show exactly what hose size does to a dust extraction setup.

Bigger intake, more airflow. The same machine moves 224 CFM through a 2 inch intake and 247 CFM through a 3 inch. That is roughly a 10 percent difference from the fitting alone, before you add hose length, bends or a partly coiled hose lying under a machine wheel. Crews who run long or undersized hose and then complain about dust escaping at the shroud are usually losing capture in the hose, not in the vacuum.

Single phase 110V is the practical part of this machine. It plugs into normal power, which means residential garages, small commercial jobs and sites without three phase service. Check the circuit though. A 2.4 kW load is real, and running it on the same circuit as another tool is how breakers trip mid-grind.

HEPA filtration governs what the machine exhausts, which matters on interior and occupied work where fine dust blown back into the room is unacceptable. It does not do anything for dust that never reached the machine, so the shroud at the tool and the hose between them are still where most capture is won or lost. Twin Coating Supplies does not claim a specific OSHA Table 1 listing for this machine, and silica compliance depends on your full setup and program.

Shipping and freight are not included in the listed price. This machine ships LTL, not parcel. Call 817-676-6793 for a freight quote and current lead time before ordering.