9" Pro Roller - 3/8" Woven, Shed Resistant Roller Cover
9 in. shed-resistant 3/8 in. woven roller cover that backrolls epoxy and urethane without dropping lint into the film.
Specifications
- Cover length
- 9 in.
- Nap
- 3/8 in.
- Fabric
- Dense woven fiber, shed resistant
- Frame fit
- Standard 9 in. roller frame
- Finish
- Smooth, lint-free lay-down
- SKU
- 1694
- Shipping
- 2 to 3 business days
Good to know
- Shed resistance matters most on clear topcoats. One loose fiber in a clear film is a callback.
- Roller covers are consumables. Order spares per job, since a cover that starts to gel cannot be rescued mid-floor.
- 3/8 in. woven is a short, tight nap for smooth surfaces and thin films, not for heavily profiled or broomed concrete.
- Match the cover to a standard 9 in. frame. Confirm your frame length before ordering a case.
About the 9" Pro Roller - 3/8" Woven, Shed Resistant Roller Cover
The 9 inch Pro Roller Cover is a shed-resistant, 3/8 inch woven cover built for coating work rather than wall paint. It sits at the finishing end of the sequence. Material goes down with a gauge rake or squeegee, then this cover backrolls it to even out the film, pull out squeegee lines and settle the coating before it starts to gel.
Shed resistance is the reason to spend on a cover for this trade. Dense woven fibers on a durable core resist dripping and shredding, so you get a smooth, lint-free lay-down. A single fiber that lets go in a clear urethane topcoat cures into the film permanently, and the fix is a sand and recoat on someone else's dime. On a solid color base coat a shed shows up less, but it still shows.
The 3/8 inch woven pile is a short, tight nap suited to smooth substrates and thin films where you want the coating leveled, not stippled. It fits any standard 9 inch roller frame, so match the cover to the frame you already run.
Treat covers as consumables. Buy more than you think you need. Contractors routinely under-order roller covers and end up reusing a gelled cover, which drags cured bits back into fresh material.
What it is used for
- Backrolling epoxy base coats after squeegee or rake placement
- Applying clear urethane and polyaspartic topcoats where lint is unacceptable
- Rolling sealers and thin-film coatings on smooth concrete
- Cutting in wall sections and curbs alongside the floor system
- Any clear coat over flake where a shed fiber would be visible
Questions about this product
Why use a shed-resistant roller cover for epoxy floors?
A shed-resistant roller cover keeps loose fibers out of the coating film. On epoxy and clear urethane floors, any fiber that drops off the cover cures permanently into the finish, and correcting it means sanding and recoating. Dense woven covers like this 9 inch Pro Roller resist shredding and leave a lint-free surface.
What roller frame does this 9 inch cover fit?
This 9 inch Pro Roller Cover fits standard 9 inch roller frames, the common size most contractors already run for floor work. Measure the cage on your frame end to end before ordering a case, since 14 inch and 18 inch frames need their own covers.
What is a 3/8 inch nap roller cover best for?
A 3/8 inch nap woven cover is a short, tight pile suited to smooth surfaces and thin coating films. It levels material and pulls out squeegee lines during backrolling without leaving heavy stipple. Rougher or heavily profiled concrete generally calls for a longer nap that can reach into the texture.
How many roller covers should I order per floor?
Order more roller covers than you expect to use. Covers are consumables and this is the item contractors under-order most. Once a cover loads up with gelling epoxy it cannot be cleaned out mid-pour, and dragging a stiffening cover across fresh material pulls cured bits into the finish.
Goes well with
TCS Chip Brushes
3 in. chip brush with shed-resistant PET bristles and a wooden handle for cutting in coatings, sealers and stains.
$1.80
SKU 1749
Replacement Rubber Blade
16 in. replacement rubber blade in flexible or stiff, the wear part on the squeegee that spreads coating across the floor.
$25.95
SKU 1524
Dynamic Chip Brush
4 in. disposable chip brush for cutting in epoxy, primer and sealer at edges, posts and drains before the roller work starts.
$1.35
SKU 1549